technical data sheet adaptor rpc-1.85 jack ? mini-smp plug 08K118-S00S3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/12.04/3.0 all dimensions are in mm; tole rances according to iso 2768 m-h interface rpc-1.85 according to iec 61169-32 rpc-1.85 mechanically compatible with rpc-2.40 mini-smp according to mil-std-348a, fig. 328 mateable with gppo tm (gilbert engineering co., inc.) and ssmp tm (connectors devices, inc.) documents n/a material and plating connector parts material plating center contact beryllium copper gold, min. 1.27 m, over chemical nickel outer contact stainless steel passivated dielectric peek
technical data sheet adaptor rpc-1.85 jack ? mini-smp plug 08K118-S00S3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/12.04/3.0 f(ghz) electrical data impedance 50 frequency dc to 65 ghz return loss 30 db, dc to 12 ghz 18 db, 12 ghz to 50 ghz 15 db, 50 ghz to 65 ghz insertion loss 0.05 x db insulation resistance 5 g center contact resistance rpc-1.85 4.0 m outer contact resistance rpc-1.85 2.5 m center contact resistance mini-smp 6.0 m outer contact resistance mini-smp 2.0 m test voltage 500 v rms working voltage 150 v rms mechanical data mating cycles rpc-1.85 500 mating cycles mini-smp - full detent 100 center contact captivation 20 n coupling test torque rpc-1.85 1.65 nm recommended torque rpc-1.85 0.80 nm to 1.10 nm engagement force mini-smp - full detent 19 n max. disengagement force mini-smp - full detent 29 n max. environmental data temperature range -40c to +85c thermal shock iec 61169-1, subclause 9.4.4 corrosion iec 61169-1, subclause 9.4.6 vibration iec 61169-1, subclause 9.3.3 shock iec 61169-1, subclause 9.3.14 moisture resistance iec 61169-1, subclause 9.4.3 2002/95/ec (rohs) compliant tooling n/a suitable cables n/a packing standard 1 pce in box weight 6.4 g/pce draft date approved date rev. engineering change number name date herbert babinger 05/01/05 krautenbacher j. 19/10/06 b00 06-0478 b. dandl 19/10/06 while the information has been carefully compiled to the best of our knowled g e, nothin g is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infrin g e existin g patents. in the effort to improve our products, we reserve the right to make changes judged to be necessary.
|
